Jump to content
Automate Life
Sign in to follow this  
AYL_Alan

Hubitat Updates

Recommended Posts

Thought we should give you an update on the Hubitat Elevation Hub!

Hubitat Elevation Platform update 2.1.7 is now available:

Please note, the process takes about a minute to download (depending on your Internet connection) and extract the hub update, and 1-2 minutes to perform the update after you click 'Update Hub'. We recommend that you periodically download a backup of your setup from the Settings page, Backup and Restore.

Changes from 2.1.6:

Drivers and Devices

  • New drivers:
    • Aeotec Recessed Door Sensor 7 (ZW187-A)
    • Hue Smart Button ([046677553715](https://www2.meethue.com/en-us/p/hue-smart-button/046677553715))
    • Ikea Zigbee Sound Controller ([SYMFONISK Sound Controller](https://www.ikea.com/us/en/p/symfonisk-sound-remote-white-20370482/))
    • Fibaro Heat Controller Thermostat Head ([FIBEFGT-001](https://www.fibaro.com/en/products/the-heat-controller/))
    • Nue Zigbee Fan Controller (HGZB-FS)
    • Nue Zigbee Scene Controller ([HGZB-1S, HGZB-2S, HGZB-4S](https://3asmarthome.com/zigbee-scene-switch))
    • Heiman Zigbee Gas Detector ([HS1CG](http://www.heimantech.com/product/102.html))
    • RGBgenie Micro Zigbee Dimmer ([ZB-4002, ZB-4021](https://rgbgenie.com/?product=zigbee-3-0-plus-micro-controller-and-lamp-module-single-channel-trailing-edge-dimmer))
    • Zooz RGBW Dimmer ([ZEN-31](https://www.thesmartesthouse.com/products/zooz-z-wave-plus-s2-rgbw-dimmer-for-led-strips))
    • Zooz Outdoor Motion Sensor ([ZSE-29](https://www.thesmartesthouse.com/collections/motion-sensors/products/zooz-z-wave-plus-s2-outdoor-motion-sensor-zse29-battery-or-usb-power))
  • New tested devices:
    • GLEDOPTO Mini Zigbee RGB+CCT Controller using Generic ZigBee RGBW Light
    • Nue HGZB-07A using Generic ZigBee RGBW Light
    • Innr GU10 Colour bulb using Generic ZigBee RGBW Light
    • Powely Thermostat using Generic Z-Wave Thermostat
    • GE ZigBee Plug-In Switch using GE Zigbee Switch
    • CEL Cortet Z10 using Ikea TRADFRI Signal Repeater
    • Aeotec Range Extender 7 using Generic Z-Wave Repeater
    • RGBgenie ZB-4003 in wall micro switch using Generic Zigbee Switch
    • SmartThings UK outlet using Generic Zigbee Outlet
  • New driver features:
    • Add physical/digital to GE Zigbee switch and Dimmer drivers
    • Add flash command to GE Zigbee switch and Generic Zigbee Switch drivers

New App Features

  • Rule Machine:
    • Added Change Color Temperature Over Time.
    • Added Set String variable from HTTP GET response.
    • Added Set String variable from HTTP POST response.
    • Added set %value% from endpoint parameter.
    • Endpoint trigger now sets %device% to “End Point”.
    • Added create new condition to edit expression.
    • Added ability to use POST to http endpoint trigger; post body is in %value% as string.
    • Added capability “Actuator” to GV variable connectors, allowing them to be set by Custom Actions.
  • Thermostat Scheduler:
    • Now supports multiple thermostats, and has an improved UI.  Warning: Once you open an existing instance of Thermostat Scheduler in the web ui with 2.1.7, it will be modified in such a way that would make the user interface of Thermostat Scheduler no longer work with prior releases, prior to 2.1.7.  So, if you were to rollback to a prior release, you would also need to restore a database backup from the prior release. Thermostat Scheduler would continue to run correctly (except for Rules that control Thermostat Scheduler), but its user interface would not be usable nor would Rules that control Thermostat Scheduler work correctly.  New instances of Thermostat Scheduler created with 2.1.7 will not work with prior releases.
  • Link to Hub:  Added Energy Meter and Power Meter support.

Bug Fixes

  • Rule 4.0:
    • Fixed variable to variable comparison UI.
    • Fixed a UI verb for conditions where it said “becomes” instead of “is”.
    • Fixed subscriptions for custom attributes changed.
    • Fixed bug with Send HTTP POST action.
    • Fixed UI bug with setting bulb named color after custom color.
    • Fixed a bug in Edit Expression that erroneously said “Double operators” for ) before AND.
    • Fixed Button LED triggers, and added Button LED Wait for Event.  If you have Button LED triggers in rules, these rules must be opened and either Updated or Done hit before they will work.
  • Fixed occasional Null error when turning on for all Sengled Element drivers.
  • Fixed unknown being reported for idle operating state on some zigbee thermostats using Generic Zigbee Thermostat driver.
  • Fixed Null error in some situations when using flash command. (all Z-Wave switch and dimmer drivers)
  • Fixed occasional Null error in GoControl Z-Wave Thermostat driver ThermostatSetpointReport.
  • Fixed setLevel in Hampton Bay Fan Component driver.
  • Fixed debug logging on Chromecast video driver.
  • Fixed no battery reports and inaccurate Lux reporting thresholds in Hue Motion Sensor.
    • Please click configure in the driver to apply these changes
  • Fixed incorrect “digital” event type on Lutron Aurora Controller.
  • Fixed power reporting for Develco mini outlet using Generic Zigbee Outlet driver.
  • Fixed GE Smart Fan Control ignoring setLevel 100.
  • GE Zigbee Dimmer, fixed level reporting when turned off.

Platform Changes

  • Added httpPatch method for Drivers and Apps
  • Like 1

Share this post


Link to post
Share on other sites

Another Update; interesting that these updates happen around big conferences and shows like CES2020. Inovelli had some interesting Z-Wave Devices at the Z-Wave alliance.

Hubitat Elevation Platform update 2.1.8 is now available:

Please note, the process takes about a minute to download (depending on your Internet connection) and extract the hub update, and 1-2 minutes to perform the update after you click 'Update Hub'. We recommend that you periodically download a backup of your setup from the Settings page, Backup and Restore.

Changes from 2.1.7:

Drivers and Devices

  • New drivers:
    • Inovelli Z-Wave Smart Scene Switch S2 ([LZW30-SN](https://inovelli.com/shop/smart-light-switches/zwave-smart-switches-gen2/z-wave-on-off-switch-neutral-required-scenes-notifications/))
    • Inovelli Z-Wave Smart Switch S2  ([LZW30](https://inovelli.com/shop/smart-light-switches/zwave-smart-switches-gen2/pre-order-z-wave-on-off-switch-base-model/))
    • Inovelli Z-Wave Smart Dimmer (NZW31)
    • Inovelli Z-Wave Smart Scene Dimmer (NZW31)
    • Inovelli Z-Wave Smart Switch (NZW30)
    • Inovelli Z-Wave Smart Scene Switch (NZW30)
    • GE Enbrighten Z-Wave Smart Dimmer ([46203](https://byjasco.com/products/ge-enbrighten-z-wave-plus-wall-smart-dimmer-quickfit-and-simplewire))
    • GE Enbrighten Z-Wave Smart Switch ([46201](https://byjasco.com/ge-enbrighten-z-wave-plus-smart-switch-quickfit-and-simplewire))
    • Honeywell T6 Pro Z-Wave Thermostat ([TH6320ZW2003](https://www.honeywellhome.com/T6-Pro-Z-wave))
    • Aeotec Dual Micro Switch (DSC17)
    • Zooz MultiRelay ([ZEN16](https://www.thesmartesthouse.com/products/zooz-z-wave-plus-s2-multirelay-zen16-with-3-dry-contact-relays-20-a-15-a-15-a))
    • Zooz Double Switch ([ZEN30](https://www.thesmartesthouse.com/products/zooz-z-wave-plus-s2-double-switch-zen30-white-for-light-fan-combo))
    • SAGE Doorbell Sensor
    • SAGE Light Switch Controller
    • Virtual Smoke Detector
    • Virtual CO Detector
  • New tested devices:
    • Innr UK Zigbee outlet using Generic Zigbee Outlet
    • Nue HGZB-01A Zigbee switch using Nue Zigbee Switch
    • Nue HGZB-021 Zigbee Dimmer using Nue Zigbee Dimmer
    • Nue ZB-18A Zigbee RGBW strip controller using Generic Zigbee RGBW Light
    • RGBGenie ZB-1025 Zigbee controller using RGBGenie Micro Zigbee Dimmer
    • RGBGenie ZB-1003 Zigbee controller using RGBGenie Micro Zigbee Dimmer
    • RGBGenie ZW-1001 Z-Wave dimmer using Generic Z-Wave Smart Dimmer
    • RGBGenie ZW-1002 Z-Wave RGBW controller using Generic Z-Wave RGBWW Controller
    •  
  • New driver features:
    • Iris V3 Keypad, add beep for older firmware devices.
    • Lutron Pico drivers, add three button option and support.
    • NYCE Motion Sensor Series, add humidity get to refresh command.

New App Features

  • Rule Machine:
    • Added connectors for local variables.
    • Add time variables (see the community for more information).
  • Group-2.1: Added button to update devices available for selection.
  • Hubitat Dashboard:  Added Variable Time template for RM time variables.
  • Yeelight integration:
    • Added ceiling4 and color6 bulb support.

Bug Fixes

  • Rule 4.0: Fixed error thrown by times in older rules when editing actions.
  • Thermostat Scheduler:  Fixed bug with required separation.
  • Scene Transition: Fixed bug with dimmers.
  • Hue Bridge Integration: Fix null error on application label change.
  • Add CRCEncap to Fibaro 2 dimmer and switch drivers, fixes reporting issues in some situations.
  • Fix GE Zigbee Dimmer, single spastic power report when turned initially turned off.
  • Fix UK ST outlet power reporting when using Generic Zigbee Outlet driver.
  • Fix TransitionTime preference issues in Lutron Dimmer driver.
  • Fixed occasional Null error when turning on for all Sengled Element drivers.
  • Group-2.1: Added button to refresh device lists
  • Raw Lan HubAction message responses will include the payload as a Base64 encoded string

Platform Changes

  • Extended the following Z-Wave command classes
    • Basic up to V2
    • SensorMultilevel up to  V11
    • Meter up to V5
    • Central Scene up to V3
    • Version up to V3
    • Time up to V2
    • Multichannel Association up to V4
    • Indicator up to V3
    • Firmware Update MetaData up to V6
    • Association Group Information up to V3
    • Association up to V3
    • Notification up to V8
    • Multichannel up to V4
    • Thermostat Fan Mode up to V3
  • Incoming calls for App Web endpoints now includes headers
  • Incoming calls for App Web endpoints where the App does not exist will now log a message in the logs including the source ip address.
  • Added optional flag to ignore SSL issues (ie: self signed certificates) with http calls (httpGet, httpPost, etc)
  • Like 2

Share this post


Link to post
Share on other sites

New Version Available: 2.1.8.117

Hubitat Elevation Platform update 2.1.8 is now available:

Please note, the process takes about a minute to download (depending on your Internet connection) and extract the hub update, and 1-2 minutes to perform the update after you click 'Update Hub'. We recommend that you periodically download a backup of your setup from the Settings page, Backup and Restore.

Changes from 2.1.7:

Drivers and Devices

  • New drivers:
    • Inovelli Z-Wave Smart Scene Switch S2 ([LZW30-SN](https://inovelli.com/shop/smart-light-switches/zwave-smart-switches-gen2/z-wave-on-off-switch-neutral-required-scenes-notifications/))
    • Inovelli Z-Wave Smart Switch S2  ([LZW30](https://inovelli.com/shop/smart-light-switches/zwave-smart-switches-gen2/pre-order-z-wave-on-off-switch-base-model/))
    • Inovelli Z-Wave Smart Dimmer (NZW31)
    • Inovelli Z-Wave Smart Scene Dimmer (NZW31)
    • Inovelli Z-Wave Smart Switch (NZW30)
    • Inovelli Z-Wave Smart Scene Switch (NZW30)
    • GE Enbrighten Z-Wave Smart Dimmer ([46203](https://byjasco.com/products/ge-enbrighten-z-wave-plus-wall-smart-dimmer-quickfit-and-simplewire))
    • GE Enbrighten Z-Wave Smart Switch ([46201](https://byjasco.com/ge-enbrighten-z-wave-plus-smart-switch-quickfit-and-simplewire))
    • Honeywell T6 Pro Z-Wave Thermostat ([TH6320ZW2003](https://www.honeywellhome.com/T6-Pro-Z-wave))
    • Aeotec Dual Micro Switch (DSC17)
    • Zooz MultiRelay ([ZEN16](https://www.thesmartesthouse.com/products/zooz-z-wave-plus-s2-multirelay-zen16-with-3-dry-contact-relays-20-a-15-a-15-a))
    • Zooz Double Switch ([ZEN30](https://www.thesmartesthouse.com/products/zooz-z-wave-plus-s2-double-switch-zen30-white-for-light-fan-combo))
    • SAGE Doorbell Sensor
    • SAGE Light Switch Controller
    • Virtual Smoke Detector
    • Virtual CO Detector
  • New tested devices:
    • Innr UK Zigbee outlet using Generic Zigbee Outlet
    • Nue HGZB-01A Zigbee switch using Nue Zigbee Switch
    • Nue HGZB-021 Zigbee Dimmer using Nue Zigbee Dimmer
    • Nue ZB-18A Zigbee RGBW strip controller using Generic Zigbee RGBW Light
    • RGBGenie ZB-1025 Zigbee controller using RGBGenie Micro Zigbee Dimmer
    • RGBGenie ZB-1003 Zigbee controller using RGBGenie Micro Zigbee Dimmer
    • RGBGenie ZW-1001 Z-Wave dimmer using Generic Z-Wave Smart Dimmer
    • RGBGenie ZW-1002 Z-Wave RGBW controller using Generic Z-Wave RGBWW Controller
    •  
  • New driver features:
    • Iris V3 Keypad, add beep for older firmware devices.
    • Lutron Pico drivers, add three button option and support.
    • NYCE Motion Sensor Series, add humidity get to refresh command.

New App Features

  • Rule Machine:
    • Added connectors for local variables.
    • Add time variables (see the community for more information).
  • Group-2.1: Added button to update devices available for selection.
  • Hubitat Dashboard:  Added Variable Time template for RM time variables.
  • Yeelight integration:
    • Added ceiling4 and color6 bulb support.

Bug Fixes

  • Rule 4.0: Fixed error thrown by times in older rules when editing actions.
  • Thermostat Scheduler:  Fixed bug with required separation.
  • Scene Transition: Fixed bug with dimmers.
  • Hue Bridge Integration: Fix null error on application label change.
  • Add CRCEncap to Fibaro 2 dimmer and switch drivers, fixes reporting issues in some situations.
  • Fix GE Zigbee Dimmer, single spastic power report when turned initially turned off.
  • Fix UK ST outlet power reporting when using Generic Zigbee Outlet driver.
  • Fix TransitionTime preference issues in Lutron Dimmer driver.
  • Fixed occasional Null error when turning on for all Sengled Element drivers.
  • Group-2.1: Added button to refresh device lists
  • Raw Lan HubAction message responses will include the payload as a Base64 encoded string

Platform Changes

  • Extended the following Z-Wave command classes
    • Basic up to V2
    • SensorMultilevel up to  V11
    • Meter up to V5
    • Central Scene up to V3
    • Version up to V3
    • Time up to V2
    • Multichannel Association up to V4
    • Indicator up to V3
    • Firmware Update MetaData up to V6
    • Association Group Information up to V3
    • Association up to V3
    • Notification up to V8
    • Multichannel up to V4
    • Thermostat Fan Mode up to V3
  • Incoming calls for App Web endpoints now includes headers
  • Incoming calls for App Web endpoints where the App does not exist will now log a message in the logs including the source ip address.
  • Added optional flag to ignore SSL issues (ie: self signed certificates) with http calls (httpGet, httpPost, etc)
  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...